Results 1 to 5 of 5
  1. #1
    Senior Tech 250+ Posts
    SPc821dn can't pull up WIM on computer

    Hadster's Avatar
    Join Date
    Aug 2011
    Location
    Lynchburg,VA
    Posts
    261
    Rep Power
    29

    SPc821dn can't pull up WIM on computer

    Copy tech NOT IT guy needs help! I have a customer that bought this printer from Canada and he is locked out to change settings. It came with a weird IP address like 203.299.276.200 and his network is using normal 192.168 type numbers. The problem is we can't change the IP address of auto abtain because machine gives me "You do not have these privileges" . So, if I cannot get the Web Monitor page to even show up on his computer how can I change the IP address on a printer. If I could just get the Web Monitor to show up I can take it from there regardless if someone has change the admin password. If this situation was on a MPC copier I would have no problem.

  2. #2
    AutoMajical Resolutionist 2,500+ Posts
    SPc821dn can't pull up WIM on computer

    Tonerbomb's Avatar
    Join Date
    Feb 2005
    Location
    Bugaha
    Posts
    2,589
    Rep Power
    90

    Re: SPc821dn can't pull up WIM on computer

    Can you get into service mode so you can check the setting of sp 5985?? If that's set to "2" you can only print to the printer you will not get the WIM.....
    Mystic Crystal Revelations

  3. #3
    Senior Tech 250+ Posts
    Join Date
    Sep 2012
    Location
    Turin
    Posts
    257
    Rep Power
    30

    Re: SPc821dn can't pull up WIM on computer

    Temporary place a PC in static ip mode ad set its ip to 203.299.276.XXX range.
    Then you can get to WIM on the printer and change what you have to.
    Last edited by skynetto; 06-20-2015 at 08:22 PM.

  4. #4
    Senior Tech 250+ Posts
    SPc821dn can't pull up WIM on computer

    Hadster's Avatar
    Join Date
    Aug 2011
    Location
    Lynchburg,VA
    Posts
    261
    Rep Power
    29

    Re: SPc821dn can't pull up WIM on computer

    Tonerbomb, are you talking about factory mode because I show no 5985 in my service manual in SP mode?

    skynetto, I'll see if I can figure how to do that. Thanks

  5. #5
    Retired 10,000+ Posts
    SPc821dn can't pull up WIM on computer

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,131
    Rep Power
    989

    Re: SPc821dn can't pull up WIM on computer

    Try SP 5828-091 Web On/Off. 1=Enable.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here