SC545 on mpc305

**petermuylle** · 10-14-2015

hey guys

I've got an mpc305 with SC code SC545. after reset it's ok for a while, but always return after a day or two.
The fusing unit and thermopile have allready been replaced, but no luck.

Anyone had the same problem, or any other ideas for fixing this?

**slimslob** · 10-14-2015

Could be PSU or a line voltage problem, brown out condition. Low line voltage drops low enough that the lamps needs to stay on too long during recovery.

**copier tech** · 10-16-2015

I've had reocurring fuser errors on these 305's, if it's a customer I trust or inhouse IT I show them how to reset the error they are always happy for me to share that info.

**slimslob** · 10-16-2015

Originally Posted by copier tech

I've had reocurring fuser errors on these 305's, if it's a customer I trust or inhouse IT I show them how to reset the error they are always happy for me to share that info.

Any time I show someone how to reset fusing codes I also tell them not to do more than once in an hour.