Ricoh SPC821dn toner full?

[Hadster]

Machine never shows toner depleting so of course when they run out the copies simple get light. All toners say full but not. I've replaced the RFID board and not sure what else it could be besides I/O board or a service mode setting that I'm missing. SP5051-1 is set to "0". Any idea's would be appreciated! Thanks!

[davel]

Machine never shows toner depleting so of course when they run out the copies simple get light. All toners say full but not. I've replaced the RFID board and not sure what else it could be besides I/O board or a service mode setting that I'm missing. SP5051-1 is set to "0". Any idea's would be appreciated! Thanks!

Check SP3045 is on 0

[Hadster]

Yep, checked that. SP3045 is set to 0.