Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 27
SP C430 "Special service Mode"
I have an SPC430 that has a dodgy network connector/board.
I have a spare (Used) board and want to swop it out BUT......I can't remember how to access the "special service mode" that will allow me to change the serial number on the board I'm fitting...I've done it before but have lost my notes on how to do it and Ricoh are not being very helpful!!
Any help would be appreciated
-
Technician
- Rep Power
- 16
Re: SP C430 "Special service Mode"
enter service mode, then hold the number key down and press system sp. you are in special mode!! hope that helps
-
Technician
- Rep Power
- 27
Re: SP C430 "Special service Mode"
I'll try that on Monday when I'm back in the office...hope it works....thanks
-
Technician
- Rep Power
- 27
Re: SP C430 "Special service Mode"
tnelson...when you say number key do you mean hash....if so, the spc430 does not have a hash key
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks