HDD Pro 8120S

[CRISTIAN MULLER]

Hello guys, anybody change HDD on these machines for other besides ricoh's parts catalog?i take a 2 HDDs from old MP 3351, and machine don't recognized, they are 160GB each, but the original HDD was 320GB each, so I think Is A size matter, anybody used difrent HDD size on it?

[ricohman1975]

Hello guys, anybody change HDD on these machines for other besides ricoh's parts catalog?i take a 2 HDDs from old MP 3351, and machine don't recognized, they are 160GB each, but the original HDD was 320GB each, so I think Is A size matter, anybody used difrent HDD size on it?

You need to put at least the same size

After Installing a New HDD Unit

1. Do SP5-832-001 to format the hard disk.


2. Do SP5-853-001 to copy the preset stamp data from the firmware to the hard disk


3. Do SP5-846-052 to copy back the address book to the hard disk from the SD card to which you
have already copied the address book data if possible.


4. Turn the main power switch off/on.


• Make sure the cables are correctly connected on the controller board: Red cable: Upper socket,
Black cable: Lower socket.


• If the connections are reversed, the machine will issue an error at startup. If it occurs just reconnect
the HDD correctly and start again. The HDD will not be damaged by such an incorrect startup.

[slimslob]

Yes it is a size problem. According to the Product Support Guide, each drive must have a usable area of at least 187.5GB. Original production used 250GB drives.