Thanks:
0
Likes:
0
Dislikes:
0
-
Mp 5002 loud noise when duplex
Machine makes a loud buzzing sound when duplex. Simplex is fine. Don't see anything out of place.
any ideas?
-
Re: Mp 5002 loud noise when duplex
Actually it also happens on Symplex as well
-
Re: Mp 5002 loud noise when duplex
Replaced fuser and noise gone. Still get random sc350 codes.
-
Re: Mp 5002 loud noise when duplex
SC 350 dirty ID sensor. Clean with a soft cloth dampened with water only.
-
Re: Mp 5002 loud noise when duplex
Where Is that located on this guy?
-
Field Supervisor
500+ Posts
- Rep Power
- 38
Re: Mp 5002 loud noise when duplex
when you pull out the drum unit, in that cavity is a little pcb that hangs down to the left side of where the pcu was. clean that and then there is a row of eraser lamps on the back side, check that for toner coverage as well and clean that while you havethe pcu out.
-
Re: Mp 5002 loud noise when duplex
Thanks , got it. Now to Figure out why that other fuser was making such a rattling sound !
-
Re: Mp 5002 loud noise when duplex
Unless that machine has teflon bushings between the hot roller and its bearings, probably the hot roller needed some high temp grease where the bearings are installed.The inner race of the bearing and the roller can rotate at different speeds, causing all sorts of wrong sounds.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks