Ok an update as of 3/1/17.
Connected my laptop directly via network cable and got the same results in print speed as I did with the office test, I printed via Photoshop to avoid the black image issue.
I couldn't find a RPCS Driver as they seem discontinued and those I did find were for the wrong model (IE. MPC3300).
Tried the following without positive result:
Cleared Print Spooler Folder
Changed from Vector to Raster
Set Host interface to second, higher I\O setting
Ricoh and Ricoh Plus Driver
Deselected SNTP on port
PCL Universal v4
There was a few setting that had the queue state it was printing, but sitting at the Max\Max without actually printing.
I need to look into LPR printing (Though I did switch the TCP\IP from RAW to LPR with a number put in the queue)
Need to look into Windows Postsript printing as the Photo Viewer wasn't finding the printer when I installed the Driver.
While I am not too familiar with MAC, I imagine I can use a printer share and have it render the print job on the MAC sing PS.. provided I can connect it to the same network after talking to the IT guy.
Thank you for Reading and Continuing to Assist