Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Apr 2017
    Rep Power

    SPC 430 How to clean the laser beam path

    Have some toner at the backside of the laser glass. There are some holes looking like cleaning holes, but no device to go inside. Will be appriciated if somebody could advice me how to clean the laser glasses on this printer. Thanks in advance.

  2. #2
    Field Supervisor 500+ Posts Zeldaman's Avatar
    Join Date
    Mar 2011
    Stuttgart/Baden Wuerttemberg
    Rep Power

    Re: SPC 430 How to clean the laser beam path

    Hi there!
    Sorry, but the best way is to pull out the whole unit & clean it.

  3. #3
    Trusted Tech 100+ Posts Athlontini's Avatar
    Join Date
    Jun 2012
    Rep Power

    Re: SPC 430 How to clean the laser beam path

    Pull out all the PCUs and you can access the laser glass underneath. Pinky finger wrapped in a Stretch-n-Dust usually does the trick. If not, you can grab your can of compressed air, aim the straw towards the back, and try a tiny puff.

    The laser unit is a huge pain to get out of this machine...


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here