Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Field Service Engineer 1,000+ Posts
    MPC 3003 Thin colour lines when using the DF

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    2,272
    Rep Power
    41

    Re: MPC 3003 Thin colour lines when using the DF

    Cheers for the info, a good clean with IPA (this is what I use in the uk) seemed to do the trick, the glass did look rather worn so will order that & fit next time on site.

    aaaaa.jpg

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  2. #12
    Trusted Tech 50+ Posts
    Join Date
    Oct 2013
    Location
    Midlands England
    Posts
    77
    Rep Power
    9

    Re: MPC 3003 Thin colour lines when using the DF

    If you are only getting lines on Doc-fed copies, it might simply be that fibres from the anti-static brush or mylar on the underside of the doc feed are hanging over the slit glass. From personal experience this can create weird effects on printout as these translucent fibres can also refract light and project coloured light onto the originals!! Took me along time to figure out that one.
    Hope this helps


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here