Thanks:
0
Likes:
0
Dislikes:
0
-
Ricoh SP4510dn toner problem
Costumer install new toner and printer works fine. After about 1 hour printer stops and write"Add toner" on display.
I was thinking that was something wrong with toner, so I adviced costumer to install new toner. Printer again works fine for about 1hour then stops, "Add toner" again.
Does anybody have the same problem?
When the toners was inserted to the printer, the Id chip was reseted and now this toners is not recognized by printer any more.
Is it posible somewher in SP to tell printer that it have a new toner?
Thanks
Sent from my GT-I9195I using Tapatalk
-
Re: Ricoh SP4510dn toner problem
Which toner cartridge is being used?
SP4500LA has a projected yield of 3K. That reduces to 2.1K at 3P/K 5% and 1.7K at 1 P/J 5%. Higher coverage will give even lower yields
SP4500A has double the yield and SP4500HA is double that of SP4500A.
At 42 ppm it wi1ll take just over an hour of continuous printing to print 3K pages.
-
Re: Ricoh SP4510dn toner problem
It was Sp4509ha
Sent from my GT-I9195I using Tapatalk
-
Junior Member
- Rep Power
- 0
Re: Ricoh SP4510dn toner problem
I think the toner contact is broken or damaged. Check it.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks