Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    service engineer shamnad abdullah's Avatar
    Join Date
    May 2015
    Location
    kerala
    Posts
    24
    Rep Power
    18

    Error code sc-300

    I have a ricoh spc311 printer which giving an error code of sc 300...Does anybody have any suggestions how to solve.....
    Your assistance in this matter is greatly appreciated.

    Sent from my Redmi 3S using Tapatalk

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Nov 2012
    Posts
    627
    Rep Power
    34

    Re: Error code sc-300

    SC300: High voltage power output error
    The measured voltage is not correct when the EGB measures each charge output (charge, development, image transfer belt unit, and transfer unit).

    • Disconnected or defective high voltage harness
    • Defective high voltage power supply
    • Defective EGB

    1. Check or replace the harnesses.
    2. Replace the high voltage power supply board
    3. Replace the EGB.
    4. Replace the AIOs.

    Goodluck!

  3. #3
    service engineer shamnad abdullah's Avatar
    Join Date
    May 2015
    Location
    kerala
    Posts
    24
    Rep Power
    18

    Re: Error code sc-300

    thank u @laitang

    Sent from my Redmi 3S using Tapatalk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here