Results 1 to 8 of 8
  1. #1
    Technician
    Join Date
    Jul 2016
    Location
    wrexham
    Posts
    11
    Rep Power
    4

    Ricoh pro 5100c booklet finisher problem

    we installed a brand new pro 5100c 4 weeks back. no fiery its on a print server and shared out to about 20 pc.s. it has the correct driver and latest firmware.
    It has a finisher SR4130.

    The customer is sending a 50 page a4 booklet using a3 paper 80 gram centre staples. (which is 13 sheets of a3) the machine is suppose to manage 60 sheets.

    there problem:
    it does 19 pages of the 50 page job folds and centre staples as a booklet
    then it does a 2nd booklet for the rest of the pages

    I was wondering is there an SP you can use or any other ideas?

    help would be very much appreciated

    Ben


  2. #2
    FSS / SPM 100+ Posts Setright's Avatar
    Join Date
    Nov 2008
    Posts
    230
    Rep Power
    21

    Re: Ricoh pro 5100c booklet finisher problem

    Have you witnessed the problem personally?

    Is it possible that the user has chosen Perfect Binding, where several stapled booklets are meant to be glued together as a book?


    Usually...if there is a too many/too thick booklet problem, you get no stapling or folding.


  3. #3
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    7,193
    Rep Power
    155

    Re: Ricoh pro 5100c booklet finisher problem

    I have yet to see a booklet finisher with a staple and fold capacity more than 20 sheets. The 60 sheet specification is for the main stapler, not the saddle stitch stapler.

    Even the Plockmatic Booklet Maker is limited to 30 sheets of 80gsm paper.


  4. #4
    Senior Tech 100+ Posts
    Join Date
    Oct 2011
    Location
    Sydney
    Posts
    198
    Rep Power
    15

    Re: Ricoh pro 5100c booklet finisher problem

    Quote Originally Posted by slimslob View Post
    I have yet to see a booklet finisher with a staple and fold capacity more than 20 sheets. The 60 sheet specification is for the main stapler, not the saddle stitch stapler.

    Even the Plockmatic Booklet Maker is limited to 30 sheets of 80gsm paper.
    Donít know about 4130 but 4110 has limit of 20 sheets folded which means that it should handle we sheets easily.


  5. #5
    Technician
    Join Date
    Jul 2016
    Location
    wrexham
    Posts
    11
    Rep Power
    4

    Re: Ricoh pro 5100c booklet finisher problem

    Quote Originally Posted by slimslob View Post
    I have yet to see a booklet finisher with a staple and fold capacity more than 20 sheets. The 60 sheet specification is for the main stapler, not the saddle stitch stapler.

    Even the Plockmatic Booklet Maker is limited to 30 sheets of 80gsm paper.
    Hi Guys
    firstly thanks for you replies so far!

    sorry Slimslob... i ment to put 60 page booklet not 60 sheets.

    ive been back out to them and done some more test idea,s but get the same result

    1. i asked the user to show me what settings do they select to do there job (50 page a4 booklet)
    - portrait > colour > copies 1 > document size a4 > print on a3 > paper input tray Tray 2 a3 > paper type plain & recycled > magazine > centre staple
    tested : still just uses just 10 sheets of a3 centre staples does another booklet 3 sheets centre staples to complete the whole job

    2. i tried a setting in user tools - tray priority > set it to DRIVER command as it was on machine command (used this before to overide paper mismatch issues
    tested: still same pronlem

    3. i tried using the copier side 25 sheets of a4 in df > 2 sided > select a3 > magazine > centre staple - Panel message come up - Stapling Capacity Exceeded press cont to staple in a batch > press ok > does 2 booklets again
    - for some reason it will only use 10 sheets max for a3

    all at sea with this one. we are a Ricoh dealer for North Wales + north west and trying to get anywhere with calling ricoh is a nightmare.


  6. #6
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    7,193
    Rep Power
    155

    Re: Ricoh pro 5100c booklet finisher problem

    Quote Originally Posted by Jedi Ben View Post
    Hi Guys
    firstly thanks for you replies so far!

    sorry Slimslob... i ment to put 60 page booklet not 60 sheets.
    60 page booklet would be 30 sheets which is more than 20 sheets. Even a 50 page booklet is still 25 sheets which greater than 20. If the customer needs to make booklets in the 42 to 60 page range, they need a Plockmatic. If they to make anything larger than 60 pages, it is a book not a booklet. They would need to either manually spiral bind it or purchase either a Ring Binder or a Perfect Binder.


  7. #7
    Senior Tech 100+ Posts
    Join Date
    Oct 2011
    Location
    Sydney
    Posts
    198
    Rep Power
    15

    Re: Ricoh pro 5100c booklet finisher problem

    60 A4 pages, 4 to a duplex A3 sheet = 15 sheets.


  8. #8
    Technician
    Join Date
    Jul 2016
    Location
    wrexham
    Posts
    11
    Rep Power
    4

    Angry Re: Ricoh pro 5100c booklet finisher problem

    Davel

    yes thats correct. 50page a4 booklet is 13 sheets of a3 paper. i always normally divided the booklet page amount by 4. If the booklet amount starts with an odd number then i round the answer up to the nearest

    So this finisher should handle a 60 page a4 booklet as well but after 10 a3 go through it folds and staples it


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here