Anyone please help me with this Machine MPC4502. When I print a color mix for CMYK it won't work. Please find attached picture. I already replaced fusing, drum.
Anyone please help me with this Machine MPC4502. When I print a color mix for CMYK it won't work. Please find attached picture. I already replaced fusing, drum.
What is the weight of your paper? check this is set correctly in tray paper settings.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Looks like the fusing temperature is not correct for the thickness of the paper.
Which drum did you replace and why.
Double check your fuser rebuild, pressure cams, temp and paper settings.yuk
Last edited by davel; 02-11-2018 at 04:34 AM.
Hello, if you are using heavy 100 gram paper up, you should set the paper drawer with "thick 2" paper. I hope you have installed the original fuser unit.
If that's the case, then there's bad toner in the machine. You might try setting the machine for a heavier paper weight, I had some luck with that on older machines (it's likely to blow up in your face later though, at least it did for me).
I suppose the paper may have too much moisture content too, but that's kind of unlikely.
Bookmarks