Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Sp5300 SC533

  1. #1
    Technician
    Join Date
    Jun 2018
    Posts
    17
    Rep Power
    12

    Sp5300 SC533

    Swapped fuser on this little jem of engineering, ng. power supply maybe??

  2. #2
    Service Manager 1,000+ Posts
    Sp5300 SC533

    guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Eveleth, MN
    Posts
    1,090
    Rep Power
    41

    Re: Sp5300 SC533

    Did you go into service mode and clear the error after you swapped the fuser unit?

  3. #3
    Service Manager 10,000+ Posts
    Sp5300 SC533

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,656
    Rep Power
    658

    Re: Sp5300 SC533

    Quote Originally Posted by davydoodle View Post
    Swapped fuser on this little jem of engineering, ng. power supply maybe??
    there is an SP mode you have to change to clear the fuser code... did you do that change? IF NOT... you will get the error code. The fusers do NOT have a reset fuse in them.

  4. #4
    Technician
    Join Date
    Jun 2018
    Posts
    17
    Rep Power
    12

    Re: Sp5300 SC533

    Yep did that, failed...

  5. #5
    Service Manager 10,000+ Posts
    Sp5300 SC533

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,656
    Rep Power
    658

    Re: Sp5300 SC533

    Quote Originally Posted by davydoodle View Post
    Yep did that, failed...
    you aren't trying to use a fuser from a compatible PRINTER are you? I know the only diff on some fusers like that, is the jumper harness at the front of the fuser.

  6. #6
    Service Manager 1,000+ Posts
    Sp5300 SC533

    guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Eveleth, MN
    Posts
    1,090
    Rep Power
    41

    Re: Sp5300 SC533

    If you're installing a "Donor" fuser, check the thermistors. I've seen some throw SC 5XX codes just because they were caked with old toner. Clean them, reset the code again, and give it a test.

  7. #7
    Technician
    Join Date
    Jun 2018
    Posts
    17
    Rep Power
    12

    Re: Sp5300 SC533

    Brand new out of the box, lamps good, book says try power supply

  8. #8
    Retired 10,000+ Posts
    Sp5300 SC533

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: Sp5300 SC533

    Quote Originally Posted by davydoodle View Post
    Brand new out of the box, lamps good, book says try power supply
    Brand new out of the box? Has your boss called Ricoh yet for out of box failure replacement under warranty?

  9. #9
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    2,339
    Rep Power
    80

    Re: Sp5300 SC533

    do you have a working 2nd machine to test the "brand new one"?
    did you meter the lamps and such?

  10. #10
    Technician
    Join Date
    Jun 2015
    Posts
    31
    Rep Power
    18

    Re: Sp5300 SC533

    Did you connected the small connectros on the right side at the back, near the power plug?

    Did you enter the SP to move the gear of the pression roller to the position to attach the fuser?

    Check this.

    Enviado desde mi Redmi 4X mediante Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here