Machine has gone on standby during a run.
She stays that way. no further response from the machine.
All power boards replaced and no result.
Anyone have an idea? thanks
Patrick
Machine has gone on standby during a run.
She stays that way. no further response from the machine.
All power boards replaced and no result.
Anyone have an idea? thanks
Patrick
Check the fuser thermostats for continuity.
Also, check the drum potential sensor for dust or bad connection.
Good luck!
Enviado desde mi SM-G920V mediante Tapatalk
Everything changed with a machine that works and no results. Thanks anyway.
Patrick
There's firmware that fixes this issue.
System_Copy firmware ver 3.01.1 or later
LCDC firmware ver 1.11 or later (Language firmware ver 0.71 or later)
Printer firmware ver 1.26 or later
Websys firmware ver 1.08 or later
WebUapl firmware ver 1.06 or later
Scanner firmware ver 1.13 or later
Wire from the toner pump was short-circuited with the mass.
Bookmarks