Good morning everyone, somebody knows of voltage and current of operation of AW020145-PHOTOENTERRUPTOR.
I want to test the disassembled part of the machine.
Good morning everyone, somebody knows of voltage and current of operation of AW020145-PHOTOENTERRUPTOR.
I want to test the disassembled part of the machine.
verify the connections with point to point but I am pretty sure almost all photointerruptors are 5V. Should be a 5V, a GND, and a signal that will also be 5V but change with status of blocked or not. Why not use the input check mode of the copier and check in the machine?
This sensor is around $2 (CAN). Why are you wasting your time wanting to test it? What is your actual problem that has you going down this "rabbit" hole?
I stand corrected. The sensor is $1.30 (CAN) on myricoh.
$1.30 CAN is approx $2 US. How much is $79 BRL in US dollars? Again, what is your original error/ jam code? You are probably headed in the right direction - sensors do fail but the more info you provide, the better the Copytech brain trust can help you.
Look at the parts catalog to see where else in the machine the same sensor might be located. Swap the sensors to see if you fix your problem but create another one in the location where you borrowed the sensor. Quick and easy way to determine if it is indeed the sensor or not.
Ouch!
Bookmarks