Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: ? on a spc420dn

  1. #1
    Technician
    Join Date
    May 2008
    Posts
    10
    Rep Power
    20

    ? on a spc420dn

    I have an Ricoh SPC420dn, that takes 2.5min to wake up. All the other machines here wake up in about a min. Any ideas? I have done firmware updates.
    Thanks


  2. #2
    Service Manager 1,000+ Posts rthonpm's Avatar
    Join Date
    Aug 2007
    Location
    Pennsyltucky
    Posts
    1,703
    Rep Power
    49
    Off the top of my head:

    Loose fuser connection?
    Overloaded outlet or circuit where the machine doesn't get the full voltage to power the fuser?

    Is the machine waking up, but just doing a line position before allowing a job to print? Are you comparing the start time to other models?


  3. #3
    Field Supervisor 500+ Posts Fearless V K's Avatar
    Join Date
    May 2007
    Location
    Redding, California
    Posts
    621
    Rep Power
    28
    How about if you disconnect the HDD?
    Have you tried a memory clear? (upload NVRAM 1st)

    Don't take that toner with me!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here