Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Technician
    Join Date
    May 2010
    Location
    Newcastle
    Posts
    16
    Rep Power
    16

    Ricoh cl7000 SC818, help!

    Hi everyone. I posted on a thread further down about my busted Cl7000. Everyone was very helpful and I made progress. The story is I bought another one very cheaply and put all of the best parts I had on it. I'm having a couple of problems though, an occasional 'SC818' fault, which clears if you switch the printer off and then comes back. Also my computer doesn't seem to like to see the printer on a fixed IP anymore, only DHCP. The network connection is very unstable, is this related? Any comments most appreciated. Thanks, Adam


  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Apr 2010
    Location
    the west
    Posts
    541
    Rep Power
    23
    sc818
    818 B Watchdog error
    The Bus line is held up by another
    device, or a CPU/device infinite loop
    has occurred.

    Incorrect Function DIMM installed in
    Slot #2 on Controller PCB. (Slot #2 is
    for PostScript Option only)
    Reload System Firmware.
    Replace Controller PCB

    check to see if something is installed in this slot.



Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here