Thanks:
0
Likes:
0
Dislikes:
0
-
Spc 410 dn sc301
Anyone else ever had a reoccuring SC 301 on this model ?
My problem child seems to do it after wake up each morning - I have latest firmware installed, and have tried another entire faceplate ( containing all the HVT contact pins....)
-
Field Supervisor
500+ Posts
- Rep Power
- 40
This is a Color printer right??
High voltage power board: Charge voltage output error [M]
The measured voltage is
not proper when EGB
measures the charge output
for each color.
• Defective charge roller
• Defective connectors
• Disconnected harness
• Defective high voltage power 1
1. Check the connectors.
2. Replace the PCU for magenta.
3. Replace the drum positioning plate.
-
Have already covered (replaced) these items at various times
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks