Thanks:
0
Likes:
0
Dislikes:
0
-
MPC2050 internal finisher paper stacking problem
The internal finisher does not consistantly stack papers correctly. Is there an adjustment procedure to adjust the jogger fences or has anybody come up with one?
thanks in advance
-
The grey belts that pull the papers back into the finisher for stapling aren't making good contact with the paper. There is no 'adjustment' but a slight trim of the nylon holders where they contact the paper allows better belt contact. Only about 0.5 mm of material needs to be removed.
http://www.copytechnet.com/forums/ri...correctly.html
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks