Results 1 to 3 of 3

Thread: SP C811 DN

  1. #1
    Field Supervisor 500+ Posts tcypy1961's Avatar
    Join Date
    Feb 2009
    Location
    Pensacola, FL
    Posts
    536
    Post Thanks / Like
    Rep Power
    17

    SP C811 DN

    display shows left door open when closed. Front door switches check good. Possible causes????
    Thanks!!!


  2. #2
    Junior Member
    Join Date
    Dec 2010
    Posts
    2
    Post Thanks / Like
    Rep Power
    0
    we had the same problem on a mpc6000 and we spent three days to solve the problem (change of power pcb, switch, etc...)
    The cause was a very small disconnection of two boards. try to ensure that all the boards are well interconnected.

    Good luck.


  3. #3
    Junior Member
    Join Date
    Dec 2010
    Location
    USA
    Posts
    5
    Post Thanks / Like
    Rep Power
    0
    [QUOTE=h.tiberghien;188953]we had the same problem on a mpc6000 and we spent three days to solve the problem (change of power pcb, switch, etc...)
    The cause was a very small disconnection of two boards. try to ensure that all the boards are well interconnected.

    Good luck.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here