Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: SP-C410DN

  1. #1
    Senior Tech 250+ Posts Polo-022's Avatar
    Join Date
    Sep 2007
    Posts
    454
    Rep Power
    41

    SP-C410DN

    Printer has 63K black prints and a week ago the REPLACE BLACK PCU message appeared on screen. (Black pcu has been replaced normally at 50K, last year.) So i gave a new one to my customer and he replaced it.
    Now, every time it wakes up from standby mode, it takes two to three minutes to go 'Ready'. Scrolling down Maintenance menu i can see 100% estimated life for Black PCU. Copy quality is perfect.
    When i put the old one the printer goes Ready in a few seconds every time and c.q is perfect...
    I would like to ask why this premature failure (13K print only) happened and why initialisation lasts too long since replacement...Could it be a worn-new-PCU?
    Thanks a lot for any input...

  2. #2
    Senior Tech 100+ Posts
    SP-C410DN


    Join Date
    Nov 2008
    Location
    Haanapali
    Posts
    128
    Rep Power
    0

    Re: SP-C410DN

    I would manually reset the Black PCU (SP 7804-002, Engine Service Mode) and try it again.
    It could be fine.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here