Thanks:
0
Likes:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
Ricoh MPC 3500 SC819
I have a MPC 4500 the gives a SC819 code only when the hard drives are connected. I've replaced the hard drives with a new set from Ricoh and still get the code. I've tried a controller with from a different machine and still the same.
-
Technician
- Rep Power
- 34
SC819
I had a similar problem on a Afc 3260 it turned out to be Power Supply Unit a missing voltage was the actual reason
A
-
hi
check the memory. ive just had this same code and it was the memory on the controller. it needs to be samsung memory, not hymex or canram
-
Junior Member
- Rep Power
- 0
Thanks. I'll check the power supply output voltages.
-
Junior Member
- Rep Power
- 0
Ricoh MPC 3500 SC819
It turned out that my first set of hard drives were shorted and would take out any controller that I tried to connect it to. Thanks for the suggestions.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks