Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Junior Member ivanthegeek's Avatar
    Join Date
    Nov 2007
    Posts
    9
    Rep Power
    0

    Ricoh MPC 3500 SC819

    I have a MPC 4500 the gives a SC819 code only when the hard drives are connected. I've replaced the hard drives with a new set from Ricoh and still get the code. I've tried a controller with from a different machine and still the same.


  2. #2
    Technician
    Join Date
    Nov 2007
    Posts
    33
    Rep Power
    21

    SC819

    I had a similar problem on a Afc 3260 it turned out to be Power Supply Unit a missing voltage was the actual reason
    A


  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Sep 2007
    Location
    Hampshire
    Posts
    58
    Rep Power
    21

    hi

    check the memory. ive just had this same code and it was the memory on the controller. it needs to be samsung memory, not hymex or canram


  4. #4
    Junior Member ivanthegeek's Avatar
    Join Date
    Nov 2007
    Posts
    9
    Rep Power
    0
    Thanks. I'll check the power supply output voltages.


  5. #5
    Junior Member ivanthegeek's Avatar
    Join Date
    Nov 2007
    Posts
    9
    Rep Power
    0

    Ricoh MPC 3500 SC819

    It turned out that my first set of hard drives were shorted and would take out any controller that I tried to connect it to. Thanks for the suggestions.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here