Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: MPC 3502 SC551

  1. #11
    Just a fellow wanderer 2,500+ Posts Iowatech's Avatar
    Join Date
    Dec 2009
    Location
    Iowa
    Posts
    3,746
    Rep Power
    79

    Re: MPC 3502 SC551

    Quote Originally Posted by collme View Post
    With the MPC3502 you can just switch straight off at the main switch by tray 1 as the machine will automatically go into shutdown mode before turning fully off. no need to swith off on the control panel on these newer machines
    My bad, sorry,


  2. #12
    Junior Member
    Join Date
    Nov 2008
    Posts
    6
    Rep Power
    0

    Re: MPC 3502 SC551

    Sorry for the late response, I was on vacation last week. As far as the thermistors go. I replaced the whole Fusing Unit. I have clipped the wire ties from the connector all the way to the board and power supply, check connectors. The one thing I have noticed is if I turn the machine on with the fuser out of the machine and then add the fuser it will sometimes give the code but not always. The power and enviroment issues should not be a problem since it is in my office and still does the same thing. Thinking of trying a power supply.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here