Customer wants received LG size documents to automatically resize and print on LR size paper. Tried everything, including parameter settings 10 bit 3 - didn't work.
This is about various Ricoh copiers that have fax option kit installed.
Thanks: 0
Likes: 0
Dislikes: 0
Customer wants received LG size documents to automatically resize and print on LR size paper. Tried everything, including parameter settings 10 bit 3 - didn't work.
This is about various Ricoh copiers that have fax option kit installed.
Last edited by Dexor; 03-15-2013 at 05:03 PM.
I've only done this once before (several years ago), but I seem to remember that I manged to get it worked out in fax SP mode (Printer Switches) with SP1-103-004 & 005.Originally Posted by Dexor
Check out the descriptions there. I think you'll find your solution with a little trial and error.
I just had a look at it again, and now I have a headache!
It sure seems far more complicated than it needs to be.
Hope this helps.
That rings a bell, Sandman. I had the same experience a few years ago too.
Sounds right.
“I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins
So you want only fax receptions to reduce 78% and print onto letter, or prints, copies, scans, ... any other features? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks much, makes you wonder why such basic feature would call for such complex solution, but - we've got it. Ricoh engineers!
Just the fax, man... :-)
Reply With Quote
Bookmarks