Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: priport

  1. #1
    Technician
    Join Date
    Aug 2012
    Posts
    46
    Rep Power
    0

    priport

    HI GOOD DAY i have a problem with this machine by mark priport 1010 RICOH. this machine was printing when the ink got Finnish and the machine start giving out blank copy i replace the ink but the machine keep giving blank copy. please i wish to know how i can pom the ink to Flor in the drum or what can i do to solve this problem. thanks for your consent


  2. #2
    Technician rhernandez's Avatar
    Join Date
    Feb 2013
    Location
    Irvine,California
    Posts
    8
    Rep Power
    0

    Re: priport

    You can try priming your ink supply by running the ink pump motor in tech mode.
    I usually cheat the door and squeeze the ink bag while running the pump. Worst case scenario, you open up your drum unit and turn the pump by hand. If the ink still won't come out, clean or replace all the o-rings. There is also an adjustment for ink detection.


  3. #3
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    6,870
    Rep Power
    148

    Re: priport

    Check to see if you have two masters, one on top of the other, or a sheet of paper under the master.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here