see my last post on this Ricoh MPC W2200 wide format
Basically its due to the print head leaking ink (usually black) and shorting out the MCU board. You have to replace both otherwise if you just fit the MCU it will blow again after 30 seconds.
see my last post on this Ricoh MPC W2200 wide format
Basically its due to the print head leaking ink (usually black) and shorting out the MCU board. You have to replace both otherwise if you just fit the MCU it will blow again after 30 seconds.
hi,I have facing problem with image quality black thick lines appearing. I have replaced black print head still thick lines on the print, any body face same problem Please revert back to me.
Hi,
hi,I have facing problem with image quality black thick lines appearing. I have replaced black print head still thick lines on the print, any body face same problem Please revert back to me.
sample copy attached.
Thanks,
Door open RTB.pdf
Hi, by now you have probably sorted the Door Open Issue, but if not, please see the attachment.
Bookmarks