Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19
  1. #11
    Service Manager 100+ Posts Moza's Avatar
    Join Date
    Feb 2009
    Location
    UK
    Posts
    232
    Rep Power
    34

    Re: Ricoh MP CW2200SP close front cover problem

    Quote Originally Posted by zoran.riko View Post
    HI, On a NEW MP CW2200SP after 4-6 prints after instalation, the mashine give me an paper jam and after removing paper still stays CLOSE FRONT DOOR. I chek the left and right switches with instrument and they working fine. In INPUT chek shows the left ( double ) switch is open. I chek also the wires from the switches to the board, they are fine too.
    Any suggestions PLS?

    see my last post on this Ricoh MPC W2200 wide format

    Basically its due to the print head leaking ink (usually black) and shorting out the MCU board. You have to replace both otherwise if you just fit the MCU it will blow again after 30 seconds.

  2. #12
    Technician
    Join Date
    Feb 2015
    Location
    colombo
    Posts
    19
    Rep Power
    0

    Re: Ricoh MP CW2200SP image quality problem

    hi,I have facing problem with image quality black thick lines appearing. I have replaced black print head still thick lines on the print, any body face same problem Please revert back to me.

  3. #13
    Retired 10,000+ Posts
    Ricoh MP CW2200SP close front cover problem

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: Ricoh MP CW2200SP image quality problem

    Quote Originally Posted by rexrotary View Post
    hi,I have facing problem with image quality black thick lines appearing. I have replaced black print head still thick lines on the print, any body face same problem Please revert back to me.
    Start a separate thread and you might get some help.

  4. #14
    Technician
    Join Date
    Feb 2015
    Location
    colombo
    Posts
    19
    Rep Power
    0

    Re: Ricoh MP CW2200SP image quality problem

    Quote Originally Posted by slimslob View Post
    Start a separate thread and you might get some help.
    Hi,
    Please tell me how can i make separate thread

  5. #15
    Retired 10,000+ Posts
    Ricoh MP CW2200SP close front cover problem

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: Ricoh MP CW2200SP image quality problem

    Quote Originally Posted by rexrotary View Post
    Hi,
    Please tell me how can i make separate thread
    Open the forum you want to post in. At the top left is a button that says "+ Post New Thread"

  6. #16
    Technician
    Join Date
    Feb 2015
    Location
    colombo
    Posts
    19
    Rep Power
    0

    Angry Black thick line from mpcw2200

    Hi,
    hi,I have facing problem with image quality black thick lines appearing. I have replaced black print head still thick lines on the print, any body face same problem Please revert back to me.
    sample copy attached.

    Thanks,
    Attached Files Attached Files

  7. #17
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    Re: Black thick line from mpcw2200

    Quote Originally Posted by rexrotary View Post
    Hi,
    hi,I have facing problem with image quality black thick lines appearing. I have replaced black print head still thick lines on the print, any body face same problem Please revert back to me.
    sample copy attached.

    Thanks,
    he doesn't stop, does he?

  8. #18
    Junior Member
    Join Date
    May 2015
    Location
    Chrudim
    Posts
    7
    Rep Power
    0

    Re: Black thick line from mpcw2200

    Quote Originally Posted by rexrotary View Post
    Hi,
    hi,I have facing problem with image quality black thick lines appearing. I have replaced black print head still thick lines on the print, any body face same problem Please revert back to me.
    sample copy attached.

    Thanks,
    Hi!
    I have dealt with similar issues several times. You need to check the flat cable to the MCU board and on the board of HRB printhead.
    Attached Images Attached Images

  9. #19
    Technician Ballas's Avatar
    Join Date
    Nov 2013
    Location
    South Africa
    Posts
    29
    Rep Power
    22

    Re: Ricoh MP CW2200SP close front cover problem

    Door open RTB.pdf

    Hi, by now you have probably sorted the Door Open Issue, but if not, please see the attachment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here