Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    taylomike
    Guest

    Ricoh Printers SP4210n and SP4310n

    Hello all,

    I was getting an error SC545 on my Ricoh SP4210n printer and error SC542 on my Ricoh SP4310n printer. We lost power and not sure if that was the cause of the error or not. But we purchased new fusers but error is still there is there a way to reset the fuser code? Like letting your car know the oil has been changed in your car.

    Thanks in advance,
    Mike


  2. #2
    The Mid-Volume Cog 100+ Posts Athlontini's Avatar
    Join Date
    Jun 2012
    Posts
    235
    Rep Power
    16

    Re: Ricoh Printers SP4210n and SP4310n

    You need to enter service mode and then reset the machine.

    Press OK, hold the up + down arrows for 5 seconds, then OK again.


  3. #3
    Service Manager 250+ Posts
    Join Date
    Jun 2009
    Location
    Fairfield, Ohio
    Posts
    383
    Rep Power
    21

    Re: Ricoh Printers SP4210n and SP4310n

    Quote Originally Posted by Athlontini View Post
    You need to enter service mode and then reset the machine.

    Press OK, hold the up + down arrows for 5 seconds, then OK again.

    After that I believe you have to select engine, then scroll to sp5810, then hit ok...then after that, turn power off to printer then back on..should reset both those codes. You might not have needed fusers so you can try them back in the machine to see if they were indeed bad, if not, hold onto them for later use.


  4. #4
    Service Manager 1,000+ Posts rthonpm's Avatar
    Join Date
    Aug 2007
    Location
    Pennsyltucky
    Posts
    1,703
    Rep Power
    49

    Re: Ricoh Printers SP4210n and SP4310n

    Power outages can often give you false fuser codes: the issue will be that you'll get either too much or too little voltage going through the machine for a long enough time that it trips the code. More than likely, your original fusers will work without a problem after you clear the code.


  5. #5
    Service Manager 10,000+ Posts
    Ricoh Printers SP4210n and SP4310n

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    140

    Lightbulb Re: Ricoh Printers SP4210n and SP4310n

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com



  6. #6
    The Mid-Volume Cog 100+ Posts Athlontini's Avatar
    Join Date
    Jun 2012
    Posts
    235
    Rep Power
    16

    Re: Ricoh Printers SP4210n and SP4310n

    Quote Originally Posted by ucinn View Post
    After that I believe you have to select engine, then scroll to sp5810, then hit ok...then after that, turn power off to printer then back on..should reset both those codes. You might not have needed fusers so you can try them back in the machine to see if they were indeed bad, if not, hold onto them for later use.
    These are pretty small printers...like the MP161 series, I don't think they have that SP.

    But those fusers - yeah, they're most likely fine.


  7. #7
    Senior Tech 250+ Posts
    Join Date
    May 2012
    Posts
    250
    Rep Power
    16

    Re: Ricoh Printers SP4210n and SP4310n

    Yes they have a full SP Mode and yes, you need to use 5810 to reset the fusing error.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here