No. |
Type |
Details (Symptom, Possible Cause, Troubleshooting Procedures) |
230 |
D |
FGATE ON error |
The FGATE signal did not assert within the prescribed time. (The BCU generates the FGATE signal and sends it to the LD unit when the registration sensor switches on.) |
231 |
D |
FGATE OFF error |
The FGATE signal did not go off within the prescribed time. (The BCU generates the FGATE signal and sends it to the LD unit when the registration sensor switches on.) |
- BCU IPU, Controller board harness loosen or broken
- BCU IPU defective
- Controller board defective
|
- Turn the main switch off and on.
- Check the connection between the controller board and the BCU IPU.
- Replace the BCU IPU.
- Replace the controller board.
|
Bookmarks