Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: MP2352 sc 230

  1. #1
    Senior Tech 250+ Posts Voltage's Avatar
    Join Date
    Jul 2008
    Location
    George
    Posts
    282
    Rep Power
    34

    MP2352 sc 230

    Hi guys

    I have a MP2352 that intermittently gives sc230.

    FGATE ON error
    The FGATE signal did not assert within the prescribed time.

    I have cleaned the registration sensor but it still gives the error. I am not to sure what the error means.


    Any ideas????

  2. #2
    Service Manager 250+ Posts HP:guy's Avatar
    Join Date
    Feb 2013
    Location
    World Wide Web
    Posts
    280
    Rep Power
    27

    Re: MP2352 sc 230

    No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
    230 D FGATE ON error
    The FGATE signal did not assert within the prescribed time. (The BCU generates the FGATE signal and sends it to the LD unit when the registration sensor switches on.)
    231 D FGATE OFF error
    The FGATE signal did not go off within the prescribed time. (The BCU generates the FGATE signal and sends it to the LD unit when the registration sensor switches on.)
    • BCU IPU, Controller board harness loosen or broken
    • BCU IPU defective
    • Controller board defective
    1. Turn the main switch off and on.
    2. Check the connection between the controller board and the BCU IPU.
    3. Replace the BCU IPU.
    4. Replace the controller board.




    The new update.

  3. #3
    Senior Tech 250+ Posts Voltage's Avatar
    Join Date
    Jul 2008
    Location
    George
    Posts
    282
    Rep Power
    34

    Re: MP2352 sc 230

    Quote Originally Posted by HP:guy View Post
    No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
    230 D FGATE ON error
    The FGATE signal did not assert within the prescribed time. (The BCU generates the FGATE signal and sends it to the LD unit when the registration sensor switches on.)
    231 D FGATE OFF error
    The FGATE signal did not go off within the prescribed time. (The BCU generates the FGATE signal and sends it to the LD unit when the registration sensor switches on.)
    • BCU IPU, Controller board harness loosen or broken
    • BCU IPU defective
    • Controller board defective
    1. Turn the main switch off and on.
    2. Check the connection between the controller board and the BCU IPU.
    3. Replace the BCU IPU.
    4. Replace the controller board.




    The new update.

    Thanks

    Going to be an expensive excersize :-)

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Aug 2009
    Posts
    113
    Rep Power
    31

    Re: MP2352 sc 230

    Voltage, did you get this resolved? I have the same problem with one of my accounts.

  5. #5
    Senior Tech 250+ Posts Voltage's Avatar
    Join Date
    Jul 2008
    Location
    George
    Posts
    282
    Rep Power
    34

    Re: MP2352 sc 230

    Quote Originally Posted by wester View Post
    Voltage, did you get this resolved? I have the same problem with one of my accounts.
    I just reseated the ribbons cables and it seemed to work. Have not had any complaints yet. Lucky i guess.

  6. #6
    Service Manager 1,000+ Posts Polarbear's Avatar
    Join Date
    Feb 2012
    Location
    Cape Town
    Posts
    1,070
    Rep Power
    45

    Re: MP2352 sc 230

    Ricoh has also released a "fix" firmware for this, which has been incorporated in the latest version of firmware for this model. It would be worthwhile updating the firmware to the latest version to prevent that SC code from reoccurring.
    Press the GREEN button!!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here