Hello I try putting toner in a ricoh mpc 4500 black but it does not accept it. Can anyone tell me why.
Thanks
Hello I try putting toner in a ricoh mpc 4500 black but it does not accept it. Can anyone tell me why.
Thanks
Yeah, it needs a toner pump.
Change SP 3045 [Toner End Detection Set] from 0 to 1. If the machine then functions correctly and maintains correct toner level, either the RFID chip on the cartridge is defective or the RFID board in the back of the machine is defective and the machine cannot read/write the toner level to the RFID chip.
If it doesn't attempt to load toner, then a cover is not fully closed, usually lower right one. If it does try to load, then it's probably the pump
There are 10 types of people in this world, those who understand binary maths and those who don't
Hi there!
Had this issue last week with yellow - no toner - new pump - OK (for 3 days)
No yellow toner - developer-clutch (yellow) gone - new clutch -OK
Greetings...
Bookmarks