Ricoh MP8001 Service mode

[Atrat]

What do I enter to get into the "service mode" to clear an error?

[Moza]

What do I enter to get into the "service mode" to clear an error?

What is the error you need to clear

[slimslob]

What do I enter to get into the "service mode" to clear an error?

You must not be a trained Ricoh tech and you obviously do not have access to a service manual. Entering service is a vary basic operation done at almost every service call. It is covered in the manual.

[sandmanmac]

You must not be a trained Ricoh tech and you obviously do not have access to a service manual. Entering service is a vary basic operation done at almost every service call. It is covered in the manual.

Agreed! I would just add that it also requires virtually no resourcefulness to find the answer.

[Tonerbomb]

Agreed! I would just add that it also requires virtually no resourcefulness to find the answer.

Agreed !!!!!!!!!!!!!!!!!!!!!!!! no effort = no answer........................

[Atrat]

Agreed! I would just add that it also requires virtually no resourcefulness to find the answer.

Your right. I'm Canon trained and trying to help a friend who has no Ricoh service contract, because he's getting out of the business, but has a job to run. I thought I would receive some help and a friendlier response from all.As you said it's a very simple question.If your Ricoh trained

[allan]

I know this of course started out on Ricoh's. Just for kick i googled it took me 10 seconds to find.

[allan]

Please dont be mad at me.

[sandmanmac]

. Just for kick i googled it took me 10 seconds to find.

Sounds about right.

[Atrat]

I know this of course started out on Ricoh's. Just for kick i googled it took me 10 seconds to find.

I tried that 1st and couldn't get an answer .Some irrelevant answers and a lot of ads. To say I made no effort is false .I tried Google then copytechnet. When I got to Copytechnet I got no help from techs who know the answer but are judgemental.I came here for help.