Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
250+ Posts
- Rep Power
- 27
MP C2500 light copies on and off
We have a mpc2500 and the prints will randomly be really light, to the point where it is almost a white page. We have changed the PCU, toner pump, toner hose, toner, and cleaned the lense. Any idea what may be causing this?
-
-
Re: MP C2500 light copies on and off
On 2 occasions i had to change the image belt because the mylar/tape that holds the edges of the belt were slightly curled up due to wear of the belt and touching the drums as it was going around. Also possibly retraction mechanism is sticking in some way on transfer rollers of the belt. But that would have given you an error code.
-
Re: MP C2500 light copies on and off
Check the PM counters on the SMC Data Log. If the % page and/or % distance is for the drum/developer is above 100, replace.
-
Technician
- Rep Power
- 23
Re: MP C2500 light copies on and off
-
Re: MP C2500 light copies on and off
Originally Posted by
shutch7
Clean ur ID sensors
You can stop the MFP while coping, then you can check at drum unit that the image is light or dark and then ITB and then paper transfer. This way you can isolate the issue to one location, and my experiance if there is no any SC codes may be toner or developer issue
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks