Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Sep 2013
    Location
    Burleson
    Posts
    213
    Rep Power
    0

    MP C2500 light copies on and off

    We have a mpc2500 and the prints will randomly be really light, to the point where it is almost a white page. We have changed the PCU, toner pump, toner hose, toner, and cleaned the lense. Any idea what may be causing this?


  2. #2
    Field Supervisor 500+ Posts Bantams's Avatar
    Join Date
    Jun 2012
    Location
    Bradford, West Yorkshire
    Posts
    590
    Rep Power
    22

    Re: MP C2500 light copies on and off

    are all colours light or just black if its just the black change the dev drive clutch.


  3. #3
    Senior Tech 250+ Posts Max's Avatar
    Join Date
    Oct 2011
    Posts
    340
    Rep Power
    17

    Re: MP C2500 light copies on and off

    On 2 occasions i had to change the image belt because the mylar/tape that holds the edges of the belt were slightly curled up due to wear of the belt and touching the drums as it was going around. Also possibly retraction mechanism is sticking in some way on transfer rollers of the belt. But that would have given you an error code.


  4. #4
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    6,877
    Rep Power
    148

    Re: MP C2500 light copies on and off

    Check the PM counters on the SMC Data Log. If the % page and/or % distance is for the drum/developer is above 100, replace.


  5. #5
    Technician
    Join Date
    Jun 2013
    Location
    Norwich
    Posts
    14
    Rep Power
    9

    Thumbs up Re: MP C2500 light copies on and off

    Clean ur ID sensors


  6. #6
    Senior Tech 100+ Posts PA3040's Avatar
    Join Date
    Jun 2014
    Posts
    167
    Rep Power
    0

    Re: MP C2500 light copies on and off

    Quote Originally Posted by shutch7 View Post
    Clean ur ID sensors

    You can stop the MFP while coping, then you can check at drum unit that the image is light or dark and then ITB and then paper transfer. This way you can isolate the issue to one location, and my experiance if there is no any SC codes may be toner or developer issue


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here