Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 100+ Posts copyman20's Avatar
    Join Date
    Feb 2008
    Location
    Portland, OR
    Posts
    195
    Rep Power
    21

    Ricoh SP4310n SC641-04

    Greetings everyone

    Needing some help with This printer. Customer of mine was getting SC899 error when web embedded pdf were printed. looked up the cause, and with some research on the web and manuals, looked like it was a firmware issue.
    got the firmware and installed it. when on the restart it now gave me an SC461-04 error. I tried to load the production firmware to see if it would bring the machine back, now it just goes from Preparing to load firmware than loading. but nothing happens.
    I know that you can do an error recovery by switching one of the bit switches on the controller.
    my question is. Does anyone know which switch it is, and has anyone ever had this problem updating firmware on this model?

    Thanks in advance guys


  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Mar 2011
    Posts
    58
    Rep Power
    14

    Re: Ricoh SP4310n SC641-04

    Quote Originally Posted by copyman20 View Post
    Greetings everyone

    Needing some help with This printer. Customer of mine was getting SC899 error when web embedded pdf were printed. looked up the cause, and with some research on the web and manuals, looked like it was a firmware issue.
    got the firmware and installed it. when on the restart it now gave me an SC461-04 error. I tried to load the production firmware to see if it would bring the machine back, now it just goes from Preparing to load firmware than loading. but nothing happens.
    I know that you can do an error recovery by switching one of the bit switches on the controller.
    my question is. Does anyone know which switch it is, and has anyone ever had this problem updating firmware on this model?

    Thanks in advance guys
    Try the solution from Service Manual:

    Examine the connection between the controller and the engine board.
    Replace the engine board if the error is frequent.

    Did you check all the connections?

    Last edited by thendral; 02-11-2015 at 03:15 AM.

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Mar 2011
    Posts
    58
    Rep Power
    14

    Re: Ricoh SP4310n SC641-04

    Service Manual can be found here:
    http://www.cnsonthenet.com/ricoh/SP%...e%20Manual.pdf


  4. #4
    Senior Tech 100+ Posts copyman20's Avatar
    Join Date
    Feb 2008
    Location
    Portland, OR
    Posts
    195
    Rep Power
    21

    Re: Ricoh SP4310n SC641-04

    have the manual and checked out the connections. This happened after I had updated the firmware. prior to that, the printer was working. just that it would go to an SC899 when someone printed a pdf in a web page.


  5. #5
    The New Guy 1,000+ Posts ruben's Avatar
    Join Date
    Oct 2012
    Location
    Bristol, UK
    Posts
    1,184
    Rep Power
    42

    Re: Ricoh SP4310n SC641-04

    This model was made during the earthquake in Japan, so it has two different board types.

    From the technical bulletin RM080016a:


    • Do not install the old firmware (v.1.01:01 or older) on the new engine board. This is because the old firmware cannot be used on the new board, and the new firmware (v.A2.0:20 : The new version starts with “A”) cannot be used on the old board. For this reason, the new firmware will not be released to the field.


    RM080016a.doc


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here