Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician
    Join Date
    May 2014
    Posts
    10
    Rep Power
    8

    Sp5200dn with sc220 error

    This started as a jamming issue. Somewhere along while trying to troubleshoot the jamming, it starts throwing sc220 errors. Wont feed one sheet. Starts to wind up to fed then throws the code. Is this a common error with these? I dont have much experience with these printers yet. Any ides on where i should start? Thanks


  2. #2
    Service Manager 2,500+ Posts
    Sp5200dn with sc220 error

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto
    Posts
    2,541
    Rep Power
    70

    Re: Sp5200dn with sc220 error

    Quote Originally Posted by Btrainfra View Post
    This started as a jamming issue. Somewhere along while trying to troubleshoot the jamming, it starts throwing sc220 errors. Wont feed one sheet. Starts to wind up to fed then throws the code. Is this a common error with these? I dont have much experience with these printers yet. Any ides on where i should start? Thanks
    I'm an MFP guy, and have not laid my hands on this printer, but 'common error' you ask? It didn't exist until you were 'somewhere along while troubleshooting...." so it was obviously caused by something you did along the way, rather than a typical malfunction.
    SC220 relates to a laser synchronization error, so I'd suggest, at best, that you left a connector disconnected, or at worst, you did something to take out the BICU, or damage the sync board

    (Troubleshooting a 3rd party, self-inflicted problem, can be very tricky)


  3. #3
    Junior Member NDSLTechs's Avatar
    Join Date
    Dec 2014
    Posts
    6
    Rep Power
    0

    Wink Re: Sp5200dn with sc220 error

    Hi

    Jamming issue is created by the pins on the right side of the machine which connects the AIO unit to the board. I had the same issue replaced the pins and jamming stopped. I also had SC220 which is a laser unit code - found the shutter on the LD unit to be stuck. After that it was sorted.

    Hopefully this aids your quest


  4. #4
    Technician
    Join Date
    May 2014
    Posts
    10
    Rep Power
    8

    Re: Sp5200dn with sc220 error

    It was the laser shutter. It wasnt seated fully. Thank you


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here