Results 1 to 4 of 4

Thread: MP C2500 SC995

  1. #1
    Senior Tech 100+ Posts
    Join Date
    Sep 2013
    Location
    Burleson
    Posts
    219
    Rep Power
    0

    MP C2500 SC995

    I replaced the print card from an mp c2500 with one from a different machine, it fired up, then i switched the original print cards to the original machine. And now i am having a sc995 error code and it says that it is not the original controller board, but it is. So i tried reformatting the HDD with 5-853-001 and nothing is working. Still have the sc995 code, any suggestions?


  2. #2
    Service Manager 2,500+ Posts
    MP C2500 SC995

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto
    Posts
    2,571
    Rep Power
    70

    Re: MP C2500 SC995

    GG shows this relating to your issue, but I don't have the TSB. Maybe someone else will weigh in on it for you:

    SC 995 Controller mismatch error - see TSB# 003 "Technical Tips" #4 Swapping PCB's between machines



  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Dec 2009
    Posts
    85
    Rep Power
    17

    Re: MP C2500 SC995

    Quote Originally Posted by ABS tect View Post
    I replaced the print card from an mp c2500 with one from a different machine, it fired up, then i switched the original print cards to the original machine. And now i am having a sc995 error code and it says that it is not the original controller board, but it is. So i tried reformatting the HDD with 5-853-001 and nothing is working. Still have the sc995 code, any suggestions?


    SC995


    [Cause]
    The IOB is faulty.
    [Resolution]
    Replace the IOB.
    When using an IOB that you removed from another device, refer to the notes below.
    [IOB Replacement Notes]

    • The new service parts AT-C1a/C1b can be used in common
    • AT-C1a cannot be used with an IOB that AT-C1b is attached to
    • AT-C1b cannot be used with an IOB that AT-C1a is attached to







  4. #4
    It's not easy being green 1,000+ Posts Cipher's Avatar
    Join Date
    May 2006
    Posts
    1,167
    Rep Power
    39

    Re: MP C2500 SC995

    IF you only swapped the SD card over between MPC2500's it's probably a serial number mis-match.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here