E-studio 45 recovery CD

[Bradm]

Hi All,

I am looking for a copy of the CD(s) that would have come with an E-studio 45 with a GL-1010 Controller, particularly the recovery CD, as I think I've corrupted the boot routine by turning off the power without going through the shut-down routine. Copy/print works fine, fax works fine, but network hard button brings up display of "controller is shutting down, please wait." or occasionally, "controller is starting up, please wait." In either case nothing further happens no matter how long you wait. Everything (including network hard button) was working fine until I powered down improperly, so if anyone of you can help, I'll be happy to pay for the copies. Needles to say, we don't have any of the CDs that originally came with the copier. I even tried to get from my local Toshiba dealer, but they are new to Toshiba and say they think they can't order since the 45 is now discontinued model. Looks like this site may be my last/best hope.
Thanks guys!
Brad Mitchell bradmitchell@verizon.net

[Mr Spock]

Check your email.....

[decimal]

dear Mr Spock
I also need it .My e-mail aimanho2000@yahoo.com

[rainbowe]

Request Recovery CD

Dear Mr. Spock
i also would like the recovery cd
my e-mail is okhaled@gmail.com

[WOETC]

GL1010 Recovery Disc

Your Toshiba dealer should be able to download it off the net. The Australian Dealers do. It's about 560MB so I can't email it, and I'm sorry but I cant give you the access directly to the URL. If you still can't get it contact me, and I can arrange to send you a copy, by snail mail. The Operating system has been upgraded to Linux, works like a charm and has scanning and iFax native to the system.

[Bradm]

Thanks for the offer to help. As it happens, another Toshiba Tech on this site helped me out and turned out to be local, so got set up with a service agreement etc. and am good to go. I am very grateful that there are "good guys" like him and yourself out there who are willing to help. I love the copier, but the tech support is totally dependent on the local level and folks like you who want to help. The tech support from Toshiba USA is non-existent. Thanks for being one of the "good guys"!

[Mr Spock]

Hey Bradm how are those guys treating you. I had another opportunity and had to take it but was hoping they treat you well.

[copyguy5]

eSTUDIO45 SOFTWARE

The files you need are at:
http://www.copierprof\essionals.com/...9/GL1020admv12

http://www.copierprof\essionals.com/.../GL1020clntv12

http://www.copierprof\essionals.com/.../GL1020partv20

http://www.copierprof\essionals.com/...L1020recov2125

These are the image files for each of the 4 CD ROMS; Administrator, Client, Partition and Recovery.

Good Luck

[rainbowe]

links need a username and password

to copyguy5 all of the links u referred to need a username and password please help

also i was wondering if u have the old version (windows nt 4.0 ) for gl-1010

[copyguy5]

eSTUDIO45 SOFTWARE

Sorry I forgot these were in the protected directory.

The files you need are at:

http://www.copierprofessionals.com/...9/GL1020admv12

User Name: gl10203261 Password: march2612

http://www.copierprofessionals.com/.../GL1020clntv12

User Name: gl10203271 Password: march2624

http://www.copierprofessionals.com/.../GL1020partv20

User Name: gl10203291 Password: march2636

http://www.copierprofessionals.com/...L1020recov2125

User Name: gl10203292 Password: march2648

Re: The older NT Version; I have it but it is Archived. I'll have to rest

ore it. The Newer Linux version is what you will find on the server

Copyguy5

[copyguy5]

Message from Copyguy5

We are encountering difficulty with our pasword server. Hope to have it corrected by morning.

[copyguy5]

Pages Now Available.

We moved the files to a "No Password" location while we replace our password server.

[decimal]

dear copyguy5
is this common with ga-1010 ?

[copyguy5]

Differences between GL1010 and Gl1020

I think you meant GL1010, not GA1010.
The GL1020 is the same as the GL1010 except that the GL1020 does NOT have an ewmbedded CD ROM Drive. Toshiba offers an external CR ROM Drive connecting cable to accomplish System Recovery/New Hard DRive Partitioning. We do not use this however.

After removing the rear panel and exposing the Printer Board we disconnect the IDE cable feeding the rear panel and connect a standard IDE CD ROM Drive directly to the Printer Board. Also the power gets connected to an available power plug.

It is highly recommended that you connect a monitor to the Printer Board at the monitor port. Attempting to load the software without a monitor is a waste of time.

All instructions are in the downloads I sent.

Good Luck

[decimal]

Dear copyguy5
Thank you very much .I will try .