Modified Collars for the Bizhub 200,250,350 an Di-series.

[Hansoon]

http://www.copytechnet.com/forums/konica-minolta/9888-bizhub-250-350-eating-drums.html

Collars will be available again in the coming weeks. Any inquiries:

nospam@rex-technika.com

Hans

[Hansoon]

I made an instruction how to install the modified collar in the field without having to remove the developer (starter). This to prevent further damage.

In case you want to change drum and developer at the same time the procedure is similar and doesn't need extra explanation.



Hans

PS: Please let me know if there are stupid mistakes or clunky language in the wording which I wrote on the pictures ....................

[mrwho]

Looks good to me, thanks for the explanation. I'll translate it and put it on a PDF for my colleagues who don't dominate the english language so well.

May I be so bold as to ask you for the original pictures so I can translate them?

Cheers and thanks!

[mrwho]

I can't find that modified collar anywhere - could you tell me where to order it?

Cheers!

[Hansoon]

.
If you are in the USA / Canada:

Densi PN# 7020186

If elsewhere in the world, contact manufacturer directly: contact"at"rex-technika.com. (replace "at" with @ since this panel is flooded with spammers)

See also:

http://smarka.com/members/boards/content/CTmessages/63164.htm

Hans

[k130]

Re: Modified Collars for the Bizhub 200,250,350 an Di-series.

.
If you are in the USA / Canada:

Densi PN# 7020186

If elsewhere in the world, contact manufacturer directly: contact"at"rex-technika.com. (replace "at" with @ since this panel is flooded with spammers)

See also:

http://smarka.com/members/boards/content/CTmessages/63164.htm

Hans

hi,
normally how much does it cost for a pair of these collars?
and the email should be contact 'at' [@] rex-technika.com or densi 'at' rex-technika.com?
thank you

[Hansoon]

Re: Modified Collars for the Bizhub 200,250,350 an Di-series.

The supplier for the USA and Canada is Densigraphix and can be reached under:

Densi - Welcome to Densi

The manufacturer is Rex-Technika in Germany:

contact@rex-technika.com

Hans

[goldencup]

Re: Modified Collars for the Bizhub 200,250,350 an Di-series.

I made an instruction how to install the modified collar in the field without having to remove the developer (starter). This to prevent further damage.

In case you want to change drum and developer at the same time the procedure is similar and doesn't need extra explanation.



Hans

PS: Please let me know if there are stupid mistakes or clunky language in the wording which I wrote on the pictures ....................

Sir I would like to ask if you still have available white collar with bearing? How much is it and how can i purchase it? By the way, do i have to replace only 1 collar? Thank you very much.

[Hansoon]

Re: Modified Collars for the Bizhub 200,250,350 an Di-series.

Most of the time you can replace only the collar on the driven side.

I have send you a PM.

Hans

[babavachishami]

Re: Modified Collars for the Bizhub 200,250,350 an Di-series.

I made an instruction how to install the modified collar in the field without having to remove the developer (starter). This to prevent further damage.

In case you want to change drum and developer at the same time the procedure is similar and doesn't need extra explanation.



Hans

PS: Please let me know if there are stupid mistakes or clunky language in the wording which I wrote on the pictures ....................

Thanks Hansoon. May I kindly request these guides in higher resolution
Regards
Babavachishami

[Hansoon]

Re: Modified Collars for the Bizhub 200,250,350 an Di-series.

Send me your e-mail by PM.

Hans