Samsung C2670FW Image Quality Spotty

**JLSam** · 08-15-2017

This horrendous machine has a whopping 46 pages printed on it.

Before you look at the pictures. I did a print stop test. This spottiness is happening BEFORE the fuser. I repeat, BEFORE the fuser. I have seen the print before the fuser, and saw the image on the transfer and it is also spotty. Yes, I ran my finger through the print. It's perfectly fused.

Now, I purchased this copier brand new from Samsung. We called support and they suggested a Primary Transfer Unit, and Transfer roller. We went ahead and replaced them. The image quality is still the same.

I cleaned all possible contacts, and I am on my wits end

. The toners are new, and OEM.

**JLSam** · 08-16-2017

UPDATE: I'm ordering HVPS.

Let's see what happens.

Sent from my ONEPLUS A3000 using Tapatalk

**arnh79** · 08-16-2017

Thanks for the update. I haven't seen this problem before so I'll be interested in hearing the solution.

**delboy10** · 08-16-2017

Originally Posted by JLSam

This horrendous machine has a whopping 46 pages printed on it.

Before you look at the pictures. I did a print stop test. This spottiness is happening BEFORE the fuser. I repeat, BEFORE the fuser. I have seen the print before the fuser, and saw the image on the transfer and it is also spotty. Yes, I ran my finger through the print. It's perfectly fused.

Now, I purchased this copier brand new from Samsung. We called support and they suggested a Primary Transfer Unit, and Transfer roller. We went ahead and replaced them. The image quality is still the same.

I cleaned all possible contacts, and I am on my wits end

. The toners are new, and OEM.

This may sound a little odd but from your image I would try to use a good (smooth) quality paper to see how the print out look.

delboy