Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 250+ Posts
    X7400 series - fuser belts disintegrating

    arnh79's Avatar
    Join Date
    Apr 2010
    Location
    Canada
    Posts
    445
    Rep Power
    43

    X7400 series - fuser belts disintegrating

    Is anybody else seeing this issue? I am constantly replacing fusers on the X7400 series well under expected life. It starts with hairline cracks perpendicular to paper path. Then eventually the belt completely comes apart. It was fine when the machines were under warranty but now this is costing us money. I'm just curious if anyone is seeing this and has gotten any feedback from Samsung on the issue?
    Why does every customer think they're the first one to ever say: "you've been here so much we should get you an office, ha, ha, ha"?

  2. #2
    Technician RICFOWLER's Avatar
    Join Date
    Apr 2011
    Location
    Georgetown,Delaware
    Posts
    25
    Rep Power
    27

    Re: X7400 series - fuser belts disintegrating

    I believe there was a firmware that corrected fuser issues not sure if this applies to you but worth a check into anyway , make sure firmware is updated , I have many of these out there and have had no fuser issues as of yet

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here