Hi Everyone.

Hope you are all well and busy. I just have a small inquiry about an SL-x4300lx. Customer called and said that their machine leaving sporadic lines on all pages printed. Long story short, I went and investigated and found there to be abnormal amounts of toner deposited on the Dev units. sadly have no pictures, but I have another meeting with this machine this afternoon and I will include some pictures when i return. Just wondering if anyone has had something similar happen to them? I should probably add too, when the toner is removed from the top of the dev units everything is again right as rain. I am going to remove the toner again today and update the machine to the newest firmware release and see how it then reacts. Any tips would be welcome. Thanks for taking the time to read this!

Take care!

Mitch