reset transfer belt

[stobby2]

samsung clx-6250. We have intraded one of these machines which we want to use in the office. We do not normally deal with Samsung however it is in very good nick. The transfer belt has reached its end of life and try as we may we cannot reset it. Have gone through the tech menu to the resets however the fuser, pf kits etc are there to reset but the transfer belt does not appear as an item to reset. Any ideas would be appreciated

[GIUBOSS]

hi try this way: Enter Tech Mode by pressing [MENU] [#] [1] [9] [3] [4]
2. If you do not see the Tech Mode menu press the menu button again. (You need to enter the key sequence quickly.)
3. Select Tech Menu
4. Select DataSetup
5. Arrow to Clear Counts and press OK
6. Enter Password 1934
7. Arrow to Transfer Belt and press OK.

[stobby2]

hi try this way: Enter Tech Mode by pressing [MENU] [#] [1] [9] [3] [4]
2. If you do not see the Tech Mode menu press the menu button again. (You need to enter the key sequence quickly.)
3. Select Tech Menu
4. Select DataSetup
5. Arrow to Clear Counts and press OK
6. Enter Password 1934
7. Arrow to Transfer Belt and press OK.

Hi
Many thanks for the info. We have tried this and got to the clear counts menu, pressed ok and put in 1934 but when we arrow down to find transfer belt it is not shown in the display. paper feed kits, fuser etc is but cannot find the transfer belt. I will give it another go today just in case l missed something
Thanks for the input

[GIUBOSS]

probably the transfer belt has a reset fuse hidden somewhere

[stobby2]

probably the transfer belt has a reset fuse hidden somewhere

I did wonder about this as we have had the odd samsung in and have reset with no probs so most likely a fuse somewhere. Just our luck!! new unit is around £120
didn't get a chance for another look today but will have a go tomorrow and see if l can locate a fuse
Thanks again for your help. Always appreciated

[stobby2]

probably the transfer belt has a reset fuse hidden somewhere

Forgotten all about this machine as we have just moved premises and came across it again. Seems a shame to dump it as in immaculate condition but just cannot find a way of resetting belt. I would imagine as suggested there is a reset fuse somewhere as l know Samsung put these on some of their toners on earlier machines. Does anyone know if and where the fuse might be?. The belt assembly looks like it can be dismantled reasonably easily but would be nice if someone knows where the fuse (if there is one) is located
Thanks again guys
UK Rog