Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 20
scx 6545 with fin11x error 07-11
after replacing the ejector assy got this error 07-11 . I have taken the unit apart several times just to make sure everything was plugged in properly.
According to the service manual I have a "support finger fault" because the "rear jogger unit s not operational" The fix is "remove the paper from the output tray and reboot the machine". Always good advice but useless... I tried giving the machine the "support finger" but it still throws that error can someone explain what sensor or timing issue causes this error because the service manual is worthless in this instance.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks