If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Your drum is probably dead. Organic photoconductors will tolerate soft cotton or cotton pad and alcohol, and light washing, but tissue paper ... no. Also they are light sensitive. How long was it in room light? Preferably 20 minutes or less? The drum coating can light shock, giving you large blank areas. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Based on those image quality samples that you provided?
Just shop around. Buying from Samsung is usually the least costly choice. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Hi, I had a similar issue:
Some ghost images and colored veil (when I changed the waste toner cartridge). Then I cleaned the drum with tissue paper and iso Prop, if I recall right???, but it did not help but not hurt either ! Subsequently I cleaned the transferbelt, because it had some of the color veils although its lifespan should have been o.k. for another thousand prints. It improved the print a little bit so I repeated the procedure, but ended up with print out*s that just had the black structure but most of the colored image was not printed i.e only black toner was transfered but not the 3 colors anymore on most of the paper areas. The belt is shiny and clean but maybe I rubbed away a surface treatment or plasma activation ? I desperately tried to clean the belt with cleaning benzine but it did not help. Yesterday I installed a new transfer belt kit JC9604840C with the plastic belt looking dull and this solved the issue.....
regards
you used to unclip a small unit on samsung/xerox drums ,solder a new fuse on.fuse blows and reset drum warning light on lcd.
Bookmarks