Thanks:
0
Likes:
0
Dislikes:
0
-
Samsung SCX 6345
I have a Samsung SCX 6345 in the shop. When it is powered on the display lights up and says "initialization in progress, please wait". At that point it shuts off and starts over.
I have removed finisher, DF and HDD and tried to power on with same result. I am not familiar with these machines so any help is greatly appreciated.
Thanks
Darren
-
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads
Paul@justmanuals.com
-
No thanks. If I wanted a manual I would have asked for a manual
-
Does it have fax? Have you tried disconnecting the battery plugged into the main board?
Regards!
A.
-
Copytechman;
I actually put the HDD into a KonMin BH350 and formatted it and it worked, but when I put it back in the Samsung I discovered it had a bad LSU, so I decided to save the machine for parts. Thanks for the suggestion though.
I responded to the manual guy because he never has any constructive input, just tries to sell manuals. My experience with manuals is that they rarely help. I trust an experienced tech before a manual.
I am stepping down off my soapbox now. lol
Darren
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks