I had to replace the transfer belt and fuser in this machine, how do you reset fuser counter and transfer belt counter THANK YOU
I had to replace the transfer belt and fuser in this machine, how do you reset fuser counter and transfer belt counter THANK YOU
Manual:
1. Enter in Tech Mode
2. Tech Mode>Tech Menu>OK>Data Setup>Clear Counts
3. Enter passcode: 1934
4. You can reset: imaging unit, fuser, transfer belt, roller....
Thank you very much, When you say enter tech mode do you mean in the maintinance section? how do you get to tech mode? thanks again
Ah , I forgot the most important thing Tech Mode sequence keys:
Menu>Back>Left>Right>OK>Stop/Clear>Menu
Good Luck!
thanks again for all your help
I tried to reset the fuser and tranfer assy ---menu,back,left,right,ok,stop/clear,menu doesn't get me in. is that the right sequence? am I outa order? please let me know
Sequence is correct, but You need enter it not too slow and not too fast Try again and good luck!
thanks, I just knew it had to be my fault LOL
Hello! I have a Samsung Xpress C460W and I would like to know if this procedure will reset the page counter too.
My printer says I'm running out of toner and I need to know if I reset it, I will be able to continuing printing.
I thank you all in advance for your great help!
Alejandra.
you need to install a new toner, automatic reset
Bookmarks