Yes i am aware of this, the reason i still use them is ink and supplies cost.
I run a print shop and have 3 of them running everyday printing everything from manuals to business cards etc.
...
Type: Posts; User: jose antonio
Yes i am aware of this, the reason i still use them is ink and supplies cost.
I run a print shop and have 3 of them running everyday printing everything from manuals to business cards etc.
...
Problem resolved!:)
Found a piece of plastic debris in the left side link arm that holds the 2nd transfer roller in place..this caused the roller to wander of sometimes on one side.
Looks like...
Thanks for your input, but I swapped a complete ITB with these holders intact,but problem came back after some prints.
Hi,
annyone had this problem before..see attached files, one is a normal print and the other has the copy quality problem on the lower halve of the page.
machine works fine for a while, than all of...
machine was plugged to a 120 VAC outlet:eek:
Plugged machine to dedicated 220 VAC , but left finisher and paper deck to the 120 VAC outlet
Works ok now:)
Hello,
anyone had this error on a imagepress C750 before E004-0101 ?
take out fixing unit and inspect heater lamp, and connections everything looks ok, did not find any shorted wires.
As soon...
prolonged use as with other solvents will indeed deteriorate anny rubber..i use it more as a quick temporary fix if nothing better is available at the time.
Not sure if this goes with konika,but on canon c700 series presses we always load A3 size in tray 1 for calibration.
I use Isopropyl alcohol 70%..works great, you can also try " blanket wash" ( used in printing industry) if you have acces to it.
Antonio
Hello,
yes allready did that, machine has 500k plus.
btw machine is now giving the eror code E061-0004 when performing auto gradation, or auto color mismatch correction.
you know what that...
Hi,
Have this canon image press C750 printing a dark gray band on one edge on large size papers format SRA 3 ( see attached file).
There is no banding seen when printing on smaller sizes like A4...
Jluxter,
No i don,t have it
What i have done back in 2016 is, order a new HDD from Senecadata , an authorized Oki dealer
But unfortunately this did not solve my problem ( communication error) and...
Hi..let me know your findings..i have two of these units in storage with similar problems
Hope i can fix at least one of them..i like their copy quality and build in fiery driver
Thanks for the tip!
I will check online if i can find one,some parts on these units are difficult to get now
Yes i did, but after i did a DC con + MMI clear..then the machine started printing ok again with no dark background and lines as before..but after a while the prints starts coming out ligth and...
Hello,
Anybody had this problem before? see attached files
First 2 prints 1jpg come out with little background and 3 black lines (lines are somehow offset from the 3 stripper fingers under the...
In my opinion, the best thing you can do now is buy original toners and stick to them..i tried many non OEM toners and cartridges before and got bad results and cq issues, and also decreased drum...
Yes they should, there are different types greases for plastic gears. Most are white like brill cream hair dressing.
I used to use one called plastic-slip grease.
Jose Antonio
Well for me it worked, maybe on the IRC-3200 series there is no effect on the ITB unit, but in mi case ( irc-4080) this was clearly the culprit and i have the proof for this, will send the pdf files...
Here is an update on this problem,
Have been struggling whith this for a long time, and never got perfect registration like it should.
But now finally I got the culprit; that metal plate...
Problem resolved :D...turns out the customer had some guys upgrade their network to a cloud based system plus a windows 10 upgrade , than one way or another the machine could not be seen on the...
Already did the MMI clear and also the RAM clear..but only once, will go back today and try it again some more times.
I checked..but don't get that message on screen.
Hi,
I have a IR-5050 connected as a network printer and it displays the check network connection message. The cables are all OK, tried other network cables. Carnot ping from or to the machine.
...
I installed another belt but din't help, so i proceeded with the lasers and manually put the arrow on the middle on all of them, than did a quick gradation adjust, this seemed to help.
It is still...